Correlator Splice Tables
From CwWiki
Revision as of 20:54, 22 January 2009; Hyejung (Talk | contribs)
(diff) ←Older revision | view current revision | Newer revision→ (diff)
(diff) ←Older revision | view current revision | Newer revision→ (diff)
The SPLICE TABLE contains the tie points which are used to build the spliced data record from the depth-shifted core data.
The SPLICE TABLE tie points are determined using the splice features of the SPLICE tool under the right tab.
The SPLICER TABLE can be used to generate the full spliced data records.
- the records are core data with extra information
The SPLICE TABLE should be saved frequently as the splicing progresses.
The file is written as ASCII text or XML - these data can be downloaded and pasted directly into the Initial Reports volumes.
The SPLICE TABLE format is as follows:
# Site, Hole, Core No, Section Type, Section No, Top, Bottom, Mbsf, Mcd, TIE/APPEND Site, Hole, Core No, Section Type, Section No, Top, Bottom, Mbsf, Mcd # Generated By Correlator site, hole, core, section type, section number, top, bottom, mbsf, mcd, "TIE", site, hole, core, section type, section number, top, bottom, mbsf, mcd * mbsf : meters below seafloor * mcd : meters composite depth 926 B 1 H 4 25.6000 25.6000 4.7600 4.7600 TIE 926 C 1 H 2 57.5000 57.5000 2.5800 4.7600
If there is one tie, the splice begins at 926B, Core 1 (0) and continues in 926B until section 1H-4 (4.76). then A splice is made to Hole 926C 1H-2 (4.76 cm), and data is read in that hole until sample 926C-1H-2 end point.
Here is the SPLICE TABLE.
Text Version
# Site, Hole, Core No, Section Type, Section No, Top, Bottom, Mbsf, Mcd, TIE/APPEND Site, Hole, Core No, Section Type, Section No, Top, Bottom, Mbsf, Mcd # Generated By Correlator 926 B 1 H 4 25.6000 25.6000 4.7600 4.7600 TIE 926 C 1 H 2 57.5000 57.5000 2.5800 4.7600 926 C 1 H 5 102.5000 102.5000 7.5300 9.7100 TIE 926 A 2 H 3 38.0000 38.0000 7.3800 9.7100 926 A 2 H 5 99.5000 99.5000 10.9900 13.3200 TIE 926 B 2 H 4 36.2000 36.2000 11.8700 13.3200 926 B 2 H 5 115.5000 115.5000 14.1500 15.6000 TIE 926 C 2 H 2 60.5000 60.5000 12.1100 15.6000 926 C 2 H 5 129.5000 129.5000 17.3000 20.7900 TIE 926 B 3 H 2 27.2000 27.2000 18.2800 20.7900 926 B 3 H 5 85.5000 85.5000 23.3500 25.8600 TIE 926 C 3 H 2 99.5000 99.5000 22.0000 25.8600 926 C 3 H 6 72.5000 72.5000 27.7300 31.5900 TIE 926 B 4 H 2 65.0000 65.0000 28.1600 31.5900 926 B 4 H 5 84.6000 84.6000 32.8500 36.2800 TIE 926 C 4 H 3 26.0000 26.0000 32.2700 36.2800 926 C 4 H 5 90.5000 90.5000 35.9000 39.9100 TIE 926 A 5 H 3 61.0000 61.0000 36.1200 39.9100 926 A 5 H 6 39.0000 39.0000 40.3900 44.2333 TIE 926 B 5 H 4 49.5000 49.5000 40.4900 44.2333 926 B 5 H 6 99.6000 99.6000 44.0000 47.7333 TIE 926 A 6 H 2 99.1000 99.1000 44.4900 47.7333 926 A 6 H 6 29.2000 29.2000 49.7900 53.1000 TIE 926 B 6 H 2 139.6000 139.6000 47.9000 53.1000 926 B 6 H 6 129.6000 129.6000 53.8000 59.0000 TIE 926 A 7 H 2 19.1000 19.1000 53.1900 59.0000 926 A 7 H 5 99.0000 99.0000 58.4900 64.2667 TIE 926 B 7 H 3 89.7000 89.7000 58.4000 64.2667 926 B 7 H 6 79.5000 79.5000 62.7900 68.6667 TIE 926 A 8 H 2 9.0000 9.0000 62.5900 68.6667 926 A 8 H 5 99.1000 99.1000 67.9900 74.1333 TIE 926 C 8 H 2 109.7000 109.7000 69.6000 74.1333 926 C 8 H 7 19.5000 19.5000 76.1900 80.7333 TIE 926 B 9 H 1 29.6000 29.6000 73.8000 80.7333 926 B 9 H 6 69.5000 69.5000 81.6900 88.6333 TIE 926 C 9 H 4 79.5000 79.5000 81.7900 88.6333 926 C 9 H 6 99.5000 99.5000 85.0000 91.8667 TIE 926 A 10 H 2 119.0000 119.0000 82.6900 91.8667 926 A 10 H 6 69.0000 69.0000 88.1900 97.3000 TIE 926 B 10 H 3 79.5000 79.5000 86.7900 97.3000 926 B 10 H 6 139.5000 139.5000 91.8900 102.3667 TIE 926 A 11 H 2 109.0000 109.0000 92.0900 102.3667 926 A 11 H 5 139.0000 139.0000 96.8900 107.3000 TIE 926 B 11 H 4 29.5000 29.5000 97.2900 107.3000
XML Version
<?xml version="1.0" encoding="UTF-8"?> <Correlator version="1.0"> <Data type ="splice table" leg ="154" site="926"> <Tie id="0"> <Core id="1" hole="B" type="H" section="4" bottom="25.6000" top="25.6000" mbsf="4.7600" mcd="4.7600"/> <Core tietype="tied" id="1" hole="C" type="H" section="2" bottom="57.5000" top="57.5000" mbsf="2.5800" mcd="4.7600"/> </Tie> <Tie id="1"> <Core id="1" hole="C" type="H" section="5" bottom="102.5000" top="102.5000" mbsf="7.5300" mcd="9.7100"/> <Core tietype="tied" id="2" hole="A" type="H" section="3" bottom="38.0000" top="38.0000" mbsf="7.3800" mcd="9.7100"/> </Tie> <Tie id="2"> <Core id="2" hole="A" type="H" section="5" bottom="99.5000" top="99.5000" mbsf="10.9900" mcd="13.3200"/> <Core tietype="tied" id="2" hole="B" type="H" section="4" bottom="36.2000" top="36.2000" mbsf="11.8700" mcd="13.3200"/> </Tie> <Tie id="3"> <Core id="2" hole="B" type="H" section="5" bottom="115.5000" top="115.5000" mbsf="14.1500" mcd="15.6000"/> <Core tietype="tied" id="2" hole="C" type="H" section="2" bottom="60.5000" top="60.5000" mbsf="12.1100" mcd="15.6000"/> </Tie> <Tie id="4"> <Core id="2" hole="C" type="H" section="5" bottom="129.5000" top="129.5000" mbsf="17.3000" mcd="20.7900"/> <Core tietype="tied" id="3" hole="B" type="H" section="2" bottom="27.2000" top="27.2000" mbsf="18.2800" mcd="20.7900"/> </Tie> <Tie id="5"> <Core id="3" hole="B" type="H" section="5" bottom="85.5000" top="85.5000" mbsf="23.3500" mcd="25.8600"/> <Core tietype="tied" id="3" hole="C" type="H" section="2" bottom="99.5000" top="99.5000" mbsf="22.0000" mcd="25.8600"/> </Tie> <Tie id="6"> <Core id="3" hole="C" type="H" section="6" bottom="72.5000" top="72.5000" mbsf="27.7300" mcd="31.5900"/> <Core tietype="tied" id="4" hole="B" type="H" section="2" bottom="65.0000" top="65.0000" mbsf="28.1600" mcd="31.5900"/> </Tie> <Tie id="7"> <Core id="4" hole="B" type="H" section="5" bottom="84.6000" top="84.6000" mbsf="32.8500" mcd="36.2800"/> <Core tietype="tied" id="4" hole="C" type="H" section="3" bottom="26.0000" top="26.0000" mbsf="32.2700" mcd="36.2800"/> </Tie> <Tie id="8"> <Core id="4" hole="C" type="H" section="5" bottom="90.5000" top="90.5000" mbsf="35.9000" mcd="39.9100"/> <Core tietype="tied" id="5" hole="A" type="H" section="3" bottom="61.0000" top="61.0000" mbsf="36.1200" mcd="39.9100"/> </Tie> </Data> </Correlator>
